
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX375-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 375mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X375-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This specific configuration utilizes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and features PT tapered port threads. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without swapping cylinders, though it does not hold the load without live air pressure. It operates at speeds between 30 and 800mm/s and includes adjustable air cushions at both ends to manage kinetic energy.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX375-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 325-375mm stroke window on the fly to accommodate different material thicknesses during pressing or forming operations.
Quickly adjust the retract stopper by up to 50mm to handle varying package sizes on a conveyor line without changing the cylinder.
Dial in the exact end-of-stroke position during initial commissioning to prevent mechanical crashes and optimize cycle timing.
The 50mm adjustment range is perfect for product changeovers on a packaging line, allowing operators to vary the end-stop without adding external stops. Because the nominal stroke is 375mm, an external guide is recommended to prevent excessive side-loading on the 25mm rod. To replace an existing ISO 15552 cylinder, match the 100mm bore, 375mm stroke, 50mm adjustment, PT G1/2 port, and mounting style.
Remember that the rear adjuster is a travel stop, not a locking mechanism. If your fixture needs to hold position safely without continuous air pressure, consider an AirTAC SAIL (pneumatic lock) or BSAI (clamp-lock) cylinder instead. This SAIJ model supports mounting sets Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants.
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw allows you to shorten the effective stroke from the nominal 375mm down to 325mm. This creates a 50mm travel window for fine-tuning the end position at commissioning without needing external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.