Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX45-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke45 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10
The AirTAC SAIJ100X45-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 35 to 45 mm usable travel window from its 45 mm nominal stroke.
This SKU features a SUS420J2 stainless steel rod for corrosion resistance and uses a PT tapered port. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. The rear adjuster acts as a travel stop to set deceleration, but it does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10 Is Used
Machine Changeover
Dial in the 35-45 mm travel window during product size transitions to set exact retract positions without installing external stoppers.
Assembly Station Setup
Adjust the rear screw to set precise deceleration and end positions for varying component sizes on a shared ISO 15552 assembly line.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10 the Right Cylinder?
If your process needs less force, stepping down to an 80 mm bore yields 2513 N. The 10 mm adjustment window is ideal for product changeovers, letting you dial in the exact retract position rather than adding external stops or reverting to a fixed-stroke SAI cylinder.
When matching ISO 15552 dimensions, specify the 100 mm bore, 45 mm stroke, 10 mm adjustment, PT port, and SUS420J2 rod material. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. For any load-holding requirements without continuous air, select a SAIL or BSAI cylinder instead, as this adjuster is not a lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10 FAQ
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw trims the effective travel, creating a 35 to 45 mm usable window from the 45 mm nominal stroke. It acts as a mechanical stop to set the end position, but it is not a lock and will not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.