Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX45-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke45 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S
The AirTAC SAIJ100X45-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated magnet allows for precise position detection using CMSE reed or DMSE electronic sensors.
This specific SKU provides a usable travel window of 15 to 45mm, enabling you to dial back the nominal 45mm stroke by up to 30mm during commissioning. It features a SUS420J2 stainless steel rod for corrosion resistance and uses a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S Is Used
Machine Changeover
Dial in the exact end position during product size transitions without physically replacing the cylinder or adding shims.
Fixture Positioning
Fine-tune clamping travel on heavy fixtures where the exact contact point varies by a few millimeters.
Variable End Stops
Set precise retract distances for automated assembly stations that process varying component heights.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S the Right Cylinder?
Choose this adjustable-stroke cylinder when your application requires fine end-position tuning at commissioning or frequent product-size changeovers without swapping out the entire cylinder or adding external stops. The 25mm rod and M20x1.5 thread handle high side loads well, but even with a robust rod, any long unsupported stroke requires an external guide. To match your system, note the 100mm bore, 45mm stroke, 30mm adjustment, PT G1/2 port, and -S magnet.
If you need to hold a load without live air pressure, note that the rear adjuster acts only as a travel stop, not a lock. For secure load-holding, consider the SAIL pneumatic lock, BSAI clamp-lock, or an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 30mm. This gives the 45mm nominal stroke a usable travel window of 15 to 45mm, allowing fine-tuning at commissioning without external stops.
At the maximum 1.0MPa pressure, the push force reaches 801kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.