Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX45-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke45 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40
The AirTAC SAIJ100X45-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 5 to 45 mm, allowing you to dial in the exact retract position during commissioning without swapping out the unit.
This variant features a SUS420J2 stainless steel rod for enhanced corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, though a magnet is not specified for this configuration. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR styles to streamline setup.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40 Is Used
Precision Clamping
Dial in the exact clamping depth on variable-thickness parts using the 5-45 mm adjustable travel window during machine changeovers.
Actuator Tuning
Fine-tune the retract end position at commissioning without adding external stopper blocks or changing the cylinder.
Assembly Line Setup
Adapt heavy-duty pressing stations quickly by adjusting the stroke stopper to accommodate new product dimensions.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40 the Right Cylinder?
If your application needs less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. To match this cylinder exactly, specify the 45 mm stroke, 40 mm adjustment, G1/2 port, PT threads, SUS420J2 rod, and no magnet. Because the stroke is under 300 mm, side-load concerns are minimal, but external guides are still recommended for optimal longevity.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40 FAQ
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm. With the nominal 45 mm stroke, this creates a usable travel window of 5 to 45 mm. The adjuster is a mechanical stop, not a lock, so air pressure must be maintained to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX45-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.