Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX50-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke50 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S
The AirTAC SAIJ100X50-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position without adding external stops. It provides a usable travel window of 40-50 mm, letting you dial back the 50 mm nominal stroke by up to 10 mm during machine commissioning.
This variant features a SUS420J2 stainless steel rod for enhanced corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the PT tapered port threads ensure a reliable, leak-free connection. The rear adjuster acts purely as a travel stop to set deceleration and cannot hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S Is Used
Machine Setup & Changeover
Dial in the exact 40-50 mm travel distance during product size transitions without physically remounting the cylinder or adding external mechanical stops.
Variable End-Stop Tuning
Perfect for automated assembly lines where a 10 mm rear adjustment allows operators to fine-tune the retract position to compensate for tooling wear.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S the Right Cylinder?
Choose this 100 mm bore cylinder when your application requires substantial thrust—stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, which may be insufficient for heavier payloads. The adjustable stroke is ideal for product changeovers where the exact end-of-stroke position varies slightly, saving the effort of physically swapping a fixed-stroke SAI cylinder. For any load-holding requirements without continuous air pressure, this plain SAIJ model is not a lock; you should consider the SAIL air-released lock or BSAI clamp-lock series instead. As a dimensionally interchangeable ISO 15552 cylinder, ensure your setup matches the 100 mm bore, 50 mm stroke, 10 mm adjustment, G1/2 port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S FAQ
It features a rear adjusting screw that lets you shorten the effective stroke by up to 10 mm, providing a usable travel window of 40-50 mm. This allows you to set the exact end position at commissioning without swapping the cylinder.
At the maximum 1.0 MPa pressure, the push force reaches 801 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX50-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.