Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX55-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 55mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke55 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40
The AirTAC SAIJ100X55-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 55 mm travel to a precise 15-55 mm window.
This unit features a SUS420J2 stainless steel rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the rear stopper lets you fine-tune the retract end position at commissioning without adding external stops.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40 Is Used
Variable End Stops
Dial in the exact 15 to 55 mm retract position during machine setup without swapping physical spacers.
Product Changeover
Quickly adapt the stroke window on a packaging line when introducing a new product size.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40 the Right Cylinder?
An adjustable stroke is preferred over a fixed SAI when product changeovers require shifting the end position, letting you trim up to 40 mm via the rear screw. Remember, the adjuster is a travel stop, not a lock; for load-holding without live air, select an SAIL or BSAI cylinder. To match this ISO 15552 replacement, verify the 100 mm bore, 55 mm stroke, 40 mm adjustment, PT port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40 FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjusting screw acts as a stopper to shorten the effective travel. For this 55 mm stroke model, it creates a usable 15 to 55 mm window, though it does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX55-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.