Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10
Its integrated 10mm adjustment screw allows you to dial the effective travel down to a precise 50-60mm window during commissioning without swapping out the entire unit. This bore features a robust 25mm piston rod and G1/2 porting to handle high flow and heavy loads.
This configuration uses an SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and ships with PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches, though no magnet is installed in this specific SKU. It utilizes adjustable air cushions at both ends to decelerate the load smoothly, but note that the rear stopper mechanism is a travel end-setter, not a mechanical lock.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10 Is Used
Precision End-Stop Tuning
Dial in the exact 50-60mm travel distance during machine commissioning to accommodate slight variations in part dimensions without adding external stopper blocks.
Heavy Forming Press
Leverage the 100mm bore's substantial thrust for pressing operations while using the fine adjustment to set the precise bottoming depth for delicate assembly tasks.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10 the Right Cylinder?
The 10mm adjustable window is ideal for applications requiring exact end-position tuning at machine setup or during product changeovers, avoiding the need to bolt on external physical stops. For load-holding without continuous live air pressure, this cylinder is insufficient; you should specify an SAIL air-released lock, a BSAI clamp-lock, or an external pilot-operated check valve, as the rear adjuster only restricts travel.
To replace an ISO 15552 cylinder, match the 100mm bore, 60mm stroke, 10mm adjustment range, G1/2 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 60mm stroke is relatively short, side-loading from unsupported weight is minimal, but always ensure the rod thread (M20x1.5) is properly aligned with your load coupling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10 FAQ
The rear adjusting screw acts as a stopper that physically limits the piston's travel. For this 60mm nominal stroke model, it allows you to shorten the effective stroke anywhere within a 50-60mm window to fine-tune the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.