Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S
The AirTAC SAIJ100X60-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated magnet (-S) enables direct position feedback via CMSE reed or DMSE solid-state sensors housed in the dual-side barrel grooves.
This specific SKU provides a 60mm nominal stroke that can be mechanically dialed back by up to 10mm, creating a precise 50-60mm usable travel window. The built-in PT tapered port and SUS420J2 stainless steel rod (option A) supply excellent corrosion resistance and side-load capacity. The extruded aluminum profile design omits tie-rods, and the rear stopper allows fine end-position tuning at commissioning without adding external physical stops.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S Is Used
Machine Setup Tuning
Dial in the exact 50-60mm end-stop during machine commissioning to perfect a pressing operation without machining custom spacers.
Product Size Changeover
Quickly adapt the cylinder travel on a packaging line when product dimensions change, using the 10mm rear adjustment screw.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S the Right Cylinder?
The adjustable 10mm trim is ideal for product changeovers on a line, letting you set variable end-stops on the fly. Remember that the rear adjuster acts only as a travel stop to decelerate the load; it does not hold the load without live air. For load-holding without pressure, consider a SAIL or BSAI cylinder.
To match this ISO 15552 replacement exactly, verify your bore (100mm), stroke (60mm), adjustment range (10mm), port type (PT), and magnet requirement (-S). The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR options. Because the stroke is under 300mm, external guide rails are less critical, but the 25mm rod diameter still handles standard operational side loads effectively.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S FAQ
At the maximum 1.0MPa pressure, it can deliver up to 801 kgf of push force.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 60mm nominal stroke by up to 10mm. This creates a 50-60mm usable travel window for fine-tuning end positions at commissioning without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.