Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30
The AirTAC SAIJ100X60-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 30 to 60 mm usable travel window. This variant incorporates a SUS420J2 stainless steel rod for enhanced corrosion resistance and utilizes PT tapered ports.
The external adjustment screw allows precise end-position tuning during commissioning without adding external stops. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and offers variable air cushions at both ends to decelerate loads smoothly across its 30-800 mm/s speed range.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30 Is Used
Machine Setup & Changeover
Fine-tune the 30 to 60 mm retract end-position during product family changeovers without physically swapping the cylinder or adding external mechanical stops.
Short-Stroke Pressing
Execute precise pressing and clamping operations where the exact bottoming position needs to be dialed in during machine commissioning.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30 the Right Cylinder?
Select this 100 mm bore cylinder when an application requires heavy thrust combined with variable end-stop positioning, such as accommodating multiple product sizes on a single line. The rear adjuster acts solely as a travel stop and does not hold the load without live air; for true pneumatic locking, consider the SAIL or BSAI series. To match this ISO 15552 footprint, specify the 100 mm bore, 60 mm stroke, 30 mm adjustment, PT ports, and the SUS420J2 rod material.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30 FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 30 mm, providing a usable travel window of 30 to 60 mm. It functions as a mechanical stop to set the end position and does not lock the load when air pressure is removed.
At 0.9 MPa, the push force increases to 7068 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.