Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S
The AirTAC SAIJ100X60-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down by up to 30 mm. With a 60 mm nominal stroke, this yields a highly versatile 30-60 mm usable travel window, perfect for dialing in exact end positions at commissioning without swapping out the cylinder.
This SKU is configured with a SUS420J2 stainless steel rod (code A) for superior corrosion resistance and includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. It uses a PT tapered G1/2 port and a robust M20x1.5 rod thread, which handles side loads well, though any long unsupported stroke still requires an external guide.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S Is Used
Machine Setup & Changeover
Fine-tune the 30-60 mm travel window during machine commissioning to perfectly strike heavy parts without reinstalling fixed-stroke cylinders.
Variable End-Stop Positioning
Dial in the rear stopper to adapt clamping distance for varying product sizes on an automated assembly line.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S the Right Cylinder?
The adjustable stroke is ideal for product-size changeovers on a line, letting operators fine-tune the retract end-stop on the fly rather than adding external stops or switching to a fixed-stroke SAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Remember that the rear adjuster acts solely as a travel stop to set deceleration, not as a lock. If your application requires load-holding without live air pressure, you must use an external rod lock, a pilot-operated check valve, or switch to AirTAC SAIL or BSAI cylinders. This SAIJ100X60-30-S is dimensionally interchangeable per ISO 15552, utilizing a PT port thread and a -S magnet for CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster acts as a stopper that lets you mechanically shorten the 60 mm nominal stroke by up to 30 mm, creating a usable travel window of 30 to 60 mm. It sets the travel end and deceleration but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.