Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40
The AirTAC SAIJ100X60-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 60mm nominal stroke by up to 40mm to achieve a precise 20-60mm usable travel window.
This adjustable-stroke design allows fine end-position tuning at commissioning or product changeover without swapping the cylinder or bolting on external stops. The rear adjuster acts as a travel stop to set the end position, but it does not hold the load without live air pressure. For load-holding without continuous air, consider the SAIL or BSAI series instead.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40 Is Used
Machine Changeover
Fine-tune the retract position within the 20-60mm window during product size changes on a packaging line without replacing the entire cylinder.
Variable End Stops
Dial in the exact end-of-stroke position during machine commissioning, using the rear screw to absorb setup tolerances up to 40mm.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40 the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring variable end stops, offering more flexibility than a fixed-stroke SAI cylinder.
When matching an ISO 15552 replacement, verify the 100mm bore, 60mm nominal stroke, 40mm adjustment range, PT port threads, and the correct mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR options. Because this SKU lacks the -S magnet option, it cannot use AirTAC CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40 FAQ
At the maximum 1.0MPa pressure, it can deliver up to 801kgf.
The rear adjuster screw allows you to shorten the 60mm nominal stroke by up to 40mm, creating a usable travel window of 20-60mm. The adjuster acts as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.