Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S
The AirTAC SAIJ100X60-40-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 60 mm stroke that can be dialed back by up to 40 mm, yielding a highly versatile 20-60 mm usable travel window for precise end-position tuning.
This variant includes a SUS420J2 stainless steel rod (option A) for superior corrosion resistance and features a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE solid-state sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set is strictly limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S Is Used
Machine Changeover
Dial in the exact 20 to 60 mm stroke required when switching between product sizes on a packaging line, eliminating the need for physical spacer changes.
Short-Stroke Assembly
Use the rear stopper to set a rigid, repeatable end-position for heavy-duty pressing or insertion tasks within a compact 60 mm envelope.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S the Right Cylinder?
Choose this 100 mm bore cylinder when an application demands high force over a short, variable distance. The SAIJ100X60-40-S is ideal when you need to fine-tune the end stop during machine commissioning or product changeover without swapping out the cylinder or adding external stops.
Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for true fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. To replace this ISO 15552 cylinder, match the 100 mm bore, 60 mm nominal stroke, 40 mm adjustment range, G1/2 port, and -S magnet specification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S FAQ
The cylinder has a nominal 60 mm stroke, but the rear adjuster allows you to shorten the effective travel by up to 40 mm. This creates a usable stroke window of 20 to 60 mm, enabling fine-tuning of the end position at commissioning without altering the physical cylinder mount.
The maximum force at 1.0 MPa is 801 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.