Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX60-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S
The AirTAC SAIJ100X60-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 60 mm travel by up to 50 mm. This creates a highly flexible 10-60 mm usable travel window, perfect for product changeovers without swapping hardware.
This variant features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance and includes a magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel provides sensor grooves on both sides, and the PT tapered port threads match the standard G1/2 porting for this bore size.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S Is Used
Variable End-Stop Positioning
Dial in the exact retract distance between 10 and 60 mm during setup to accommodate different material thicknesses without changing the cylinder.
Product Size Changeovers
Quickly reconfigure the stroke limit on packaging lines handling multiple carton sizes, using the rear screw to set the new end position.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S the Right Cylinder?
The adjustable 10-60 mm window is ideal for machines running mixed product sizes, letting you fine-tune the retract end-position at commissioning rather than machining external stops. If you need to hold a load without live air pressure, note that this rear adjuster acts only as a travel stop, not a lock; you should specify an SAIL or BSAI cylinder instead.
For ISO 15552 replacement matching, verify the 100 mm bore, 60 mm nominal stroke, 50 mm adjustment range, PT port threads, and the -S magnet requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is short, side-load risks are minimal, but the 25 mm rod and M20x1.5 thread provide excellent rigidity for off-center loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw lets you shorten the 60 mm nominal stroke by up to 50 mm, giving a usable travel window of 10 to 60 mm. It functions as a mechanical stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.