Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX600-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S
The AirTAC SAIJ100X600-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 500 to 600 mm. The integrated -S magnet enables position detection via CMSE reed or DMSE electronic sensors housed in the dual-side barrel grooves.
This variant features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance and utilizes PT tapered port threads. The 100 mm adjustment range allows operators to dial in the exact retract end-position during commissioning without adding external stops. The rear adjuster functions strictly as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S Is Used
Machine Setup Changeover
Fine-tune the 500 to 600 mm retract position during product line changeovers without swapping the cylinder or adding external mechanical stops.
Variable End-Stop Diverter
Adjust the stroke on the fly to push varying box sizes onto different conveyor lanes, using the 100 mm trim to adapt to package dimensions.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S the Right Cylinder?
The 100 mm adjustment window is ideal for product changeovers on a packaging line, allowing the end-stop to shift seamlessly between sizes. If your process requires the cylinder to maintain its position after air removal, a standard SAIJ will not suffice; you must integrate an external rod lock or select an AirTAC SAIL or BSAI model.
Because the 600 mm stroke is considerable, the 25 mm rod needs external guiding to prevent excessive side-loading and premature seal wear. For a direct ISO 15552 replacement, match the 100 mm bore, 600 mm stroke, PT port, SUS420J2 rod, and -S magnet, ensuring your mounting choice is limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S FAQ
It operates efficiently at speeds between 30 and 800 mm/s.
The rear adjuster acts as a stopper that lets you shorten the effective stroke by up to 100 mm, creating a 500 to 600 mm travel window. It sets the end position but does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.