Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX600-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S
The AirTAC SAIJ100X600-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a precise 590-600mm usable travel window. Equipped with a SUS420J2 stainless steel rod and a -S magnet, it pairs directly with AirTAC CMSE reed and DMSE electronic sensors via the dual-side barrel grooves.
The 10mm rear stopper screw allows fine end-position tuning during commissioning, acting purely as a travel deceleration point rather than a load lock. Because this is a profile cylinder, it provides full ISO 15552 mounting interchangeability while utilizing the reduced SAIJ mounting set, which omits FB, CA, CB, and CR brackets.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S Is Used
Product Changeover Stops
Adjusts the 590-600mm travel window quickly during packaging line size changes without physically replacing the cylinder or adding external stopper blocks.
Long-Stroke Material Handling
Moves heavy payloads across a 600mm span, utilizing the SUS420J2 stainless rod for durability and the dual sensor grooves for precise position feedback.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S the Right Cylinder?
The 10mm adjustment range is ideal for dialing in exact end stops during product changeovers instead of swapping a fixed-stroke SAI cylinder. For exact ISO 15552 replacement matching, specify: 100mm bore, 600mm stroke, PT tapered ports, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and the -S magnet. Given the 600mm stroke, an external guide is recommended to prevent excessive rod side-loading.
Remember that the rear adjuster and air cushions only set the travel end; they do not hold the load without live air. For true fail-safe load holding, integrate an external rod lock or select an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S FAQ
It can achieve a maximum push force of 801 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from the nominal 600mm down to 590mm, creating a 590-600mm window. This stopper sets the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.