Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX600-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30
The AirTAC SAIJ100X600-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 570-600mm usable travel window, letting you trim up to 30mm off the 600mm nominal stroke during machine setup.
This variant uses a SUS420J2 stainless steel rod for improved corrosion resistance and features a PT tapered G1/2 port. The extruded aluminum barrel includes sensor grooves on both sides, while the mounting interface covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30 Is Used
Variable End Stops
Dial in the exact 570 to 600mm retraction point during machine commissioning without adding external physical stops.
Product Size Changeover
Adapt automated lines to different part lengths quickly by turning the rear adjuster screw rather than swapping cylinders.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30 the Right Cylinder?
If your application requires less force, the 80mm bore offers 2513N. The rear adjuster acts purely as a travel stop for end-position tuning; it does not hold the load without live air. For load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder. Because the 600mm stroke is long and the 25mm rod can only support limited side load, an external guide is required. To replace an ISO 15552 cylinder, match the 100mm bore, 600mm stroke, 30mm adjustment, PT G1/2 port, and the required mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30 FAQ
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw lets you shorten the 600mm nominal stroke by up to 30mm, creating a 570-600mm usable travel window. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.