Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX600-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S
The AirTAC SAIJ100X600-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 600 mm nominal travel by up to 30 mm for a precise 570-600 mm usable window. The extruded aluminum barrel features sensor grooves on both sides, and because this is a -S variant, it includes a magnet ready for CMSE reed or DMSE electronic solid-state switches.
This unit utilizes a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and features PT tapered port threads (G1/2). The rear adjuster acts purely as a travel stop to fine-tune the end position during commissioning; it is not a locking mechanism and will not hold a load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S Is Used
Machine Changeovers
Rapidly reconfigure end-stops for different product lengths on a packaging line without replacing the cylinder or adding external shims.
Press Fit Tuning
Fine-tune the exact 570-600 mm insertion depth during commissioning to achieve perfect pressing force without mechanical modifications.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S the Right Cylinder?
Choose this 100 mm bore when your application requires substantial thrust—stepping down to a 63 mm bore yields 2805 N at 0.9 MPa, which may be insufficient for heavier payloads. An adjustable stroke is preferred over a fixed SAI cylinder when you need variable end-stops to accommodate product-size changes on a line without physically swapping components. For load-holding without continuous air pressure, consider the SAIL or BSAI series, or use an external pilot-operated check valve, as the SAIJ adjuster cannot hold loads. To match this ISO 15552 replacement exactly, specify the 100 mm bore, 600 mm stroke, 30 mm adjustment, PT G1/2 port, and the -S magnet.
Because this model has a 600 mm stroke, the 25 mm rod and M20x1.5 rod thread will experience amplified side-loading forces if the load is unsupported. Always guide the load externally to prevent premature seal wear and binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S FAQ
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 600 mm nominal stroke by up to 30 mm, creating a 570-600 mm usable travel window. It only sets the end position and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.