Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX600-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40
The AirTAC SAIJ100X600-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 560-600mm usable travel window from its 600mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This SKU uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and features PT tapered port threads. The rear adjuster acts purely as a mechanical stop to fine-tune the end position at commissioning without adding external stops. It is not a locking device, so live air pressure is required to hold the load in place.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40 Is Used
Machine Setup Tuning
Dial in the exact 560-600mm end position during commissioning without fabricating external stopper blocks.
Product Size Changeover
Quickly adapt the stroke end-stop on packaging lines when transitioning between different product dimensions.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40 the Right Cylinder?
The 40mm adjustment range is ideal for product changeovers, allowing you to dial in the exact end-stop without swapping the cylinder. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as this rear adjuster only limits travel.
When matching ISO 15552 dimensions for a retrofit, specify a 100mm bore, 600mm stroke, 40mm adjustment, PT port threads, SUS420J2 rod material, and the required mounting accessory from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 600mm, the long unsupported piston rod requires an external guide to prevent excessive side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40 FAQ
The rear adjuster acts as a mechanical stop that allows you to trim the effective travel by up to 40mm, creating a 560-600mm usable window. It is a travel stop, not a lock, so the cylinder requires live air to hold the load.
At 0.7MPa, the push force increases to 5497N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.