Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX600-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S
The AirTAC SAIJ100X600-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 525 to 600 mm. The integrated magnet supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual-side barrel grooves.
This unit features a SUS420J2 stainless steel rod for superior corrosion resistance and a PT tapered G1/2 port. The rear adjustment screw acts purely as a travel stop to decelerate the load at the retract end; it does not hold the load without live air. For position-holding without continuous pressure, consider the SAIL or BSAI series instead.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S Is Used
Machine Changeover
Swiftly modify the retract end-stop during format size changes on packaging lines without replacing the cylinder or bolting on external stops.
Assembly Station Setup
Dial in the precise clamping depth during initial commissioning using the rear adjuster, ensuring perfect part fitment before locking the setting.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S the Right Cylinder?
The 75 mm adjustable range is ideal for product changeovers, allowing you to dial in the exact retract end-position without swapping hardware or adding external stops. Mounting options include the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
Because the 600 mm stroke is substantial, the 25 mm rod diameter should be paired with an external guide to prevent excessive side-loading and premature seal wear. To match this cylinder for an ISO 15552 replacement, specify bore 100, stroke 600, 75 mm adjustment, PT G1/2 port, preferred mounting, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw lets you trim the effective stroke within a 525 to 600 mm window. It functions as a travel stop and relies on the air cushion for deceleration; it is not a lock and will not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX600-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.