Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX65-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 65mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke65 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S
The AirTAC SAIJ100X65-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 35 to 65 mm for precise end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for direct compatibility with AirTAC CMSE reed and DMSE electronic solid-state switches.
This model features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and utilizes PT tapered port threads (G1/2) for secure pneumatic connections. The rear adjuster acts purely as a mechanical stop to trim the retract stroke and works in tandem with the standard air cushions at both ends to decelerate the load. It does not hold the load without live air pressure; for positive load-holding, an external rod lock or a SAIL/BSAI cylinder is required.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S Is Used
Product Changeovers
Dial in the 35-65 mm travel window during machine setup to accommodate different product sizes without physically replacing the cylinder.
Assembly Line Stops
Use the rear mechanical stop to fine-tune the end-of-stroke position for varying component heights on automated assembly equipment.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S the Right Cylinder?
The adjustable stroke is ideal for product-size changeovers on a line, allowing operators to dial in the 35-65 mm travel window during commissioning rather than adding external stops.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 65 mm stroke, 30 mm adjustment, PT port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because the 25 mm rod and M20x1.5 thread handle substantial side loads, ensure proper external guiding if the load is heavy or off-center.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S FAQ
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to shorten the nominal 65 mm stroke by up to 30 mm, creating a usable travel window of 35 to 65 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX65-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.