Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10
The AirTAC SAIJ100X700-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 700 mm stroke that can be fine-tuned down by up to 10 mm, giving operators a precise 690-700 mm usable travel window during commissioning.
This variant features a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and uses PT tapered port threads with a G1/2 fitting size. The extruded aluminum barrel includes sensor grooves on both sides, allowing for the direct mounting of CMSE reed or DMSE electronic solid-state switches if a magnet is specified later.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10 Is Used
Precision End-Stop Tuning
Dial in the exact 690-700 mm end position during machine commissioning to achieve perfect workpiece contact without machining custom spacers.
Product Changeover
Quickly adjust the stroke by up to 10 mm on packaging lines when handling slightly different product sizes, minimizing downtime.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10 the Right Cylinder?
Select this 100 mm bore cylinder when an application requires high thrust that a 80 mm bore cannot provide, or step down to an 80 mm unit if 3518 N at 0.7 MPa is sufficient. The adjustable stroke is ideal for product changeovers, allowing you to dial in the end position without swapping the cylinder or adding external stops. For this 700 mm stroke, an external guide is recommended to prevent excessive side-loading on the rod.
The rear adjuster acts strictly as a mechanical stop to set the travel end and works alongside the standard air cushions to decelerate the load. It does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI variants. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10 FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from its nominal 700 mm down to 690 mm. This creates a 690-700 mm travel window for fine-tuning the end position without altering the cylinder mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.