Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX700-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S
The AirTAC SAIJ100X700-30-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 700 mm nominal stroke that can be fine-tuned backward by up to 30 mm, yielding a precise 670-700 mm usable travel window.
This model includes a magnetic piston for electronic position sensing and uses a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance. The extruded aluminum barrel incorporates sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE solid-state switches. It features G1/2 ports and a M20x1.5 rod thread, while the rear adjustment screw functions purely as a travel stop, not a load-holding lock.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S Is Used
Variable End-Stop Forming
Dial in the exact 670-700 mm retraction point on a heavy-duty metal forming press without swapping cylinders or adding mechanical spacers during product changeovers.
Machine Setup Calibration
Fine-tune the rear stopper by up to 30 mm during initial commissioning to perfectly time a 700 mm travel cycle, ensuring precise alignment of large automated fixtures.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S the Right Cylinder?
Choose this 100 mm bore cylinder when an application requires substantial thrust—up to 5497 N at 0.7 MPa—combined with variable end-stop positioning. Conversely, heavier loads requiring 6136 N at 0.5 MPa would necessitate moving up to a 125 mm bore.
Because the 700 mm stroke is relatively long, an external guide is recommended to prevent excessive side-loading on the M20x1.5 piston rod. For ISO 15552 interchangeability, match the 100 mm bore, 700 mm stroke, 30 mm adjustment, PT tapered G1/2 ports, and the -S magnet. Remember that the SAIJ rear adjuster only decelerates the load; for true position holding without live air, select a SAIL (air-released lock) or BSAI (clamp-lock) cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw acts as a mechanical stop that can trim the effective travel back by up to 30 mm, creating a 670-700 mm usable stroke window. It functions as an end-position stop and does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.