Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX700-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75
The AirTAC SAIJ100X700-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 625 to 700 mm usable travel window, allowing you to dial back the end position by up to 75 mm during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
The rear adjuster acts as a mechanical stop to set the travel end, while the built-in air cushions handle deceleration. It does not hold the load without live air; for position holding, consider a SAIL or BSAI variant.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75 Is Used
Machine Changeover
Dial in the exact retract position within the 625-700 mm window when switching between product sizes on the same production line.
Variable End Stops
Set precise ejection or push distances for varying package lengths without physically replacing the actuator.
Commissioning Tuning
Fine-tune the final end position during machine setup to perfect timing and mechanical alignment under live air.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75 the Right Cylinder?
The adjustable 75 mm window is ideal for product changeovers on a line, letting you fine-tune the retract position on the fly instead of swapping a fixed-stroke SAI cylinder. When matching an ISO 15552 replacement, verify the 100 mm bore, 700 mm stroke, 75 mm adjustment, PT port threads, and required mounting bracket.
Because the stroke is 700 mm, the 25 mm rod requires an external guide to prevent excessive side loading and premature seal wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 700 mm nominal stroke by up to 75 mm. This creates a 625 to 700 mm usable travel window for fine-tuning the end position at commissioning.
At 0.7 MPa, the push force increases to 5497 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX700-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.