
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX75-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X75-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 75 mm stroke with a 40 mm adjustment range, yielding a usable travel window of 35 to 75 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This configuration uses an SUS420J2 stainless steel rod (code A) for superior corrosion resistance compared to standard carbon steel. It features PT tapered port threads and operates at speeds of 30-800 mm/s. The rear adjuster acts purely as a travel stop to fine-tune the end position during commissioning; it does not lock the load or hold position without continuous air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX75-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position during initial commissioning to perfect a pressing or clamping operation without machining external spacers.
Quickly shorten the cylinder travel from 75 mm down to 35 mm on packaging lines when switching to a smaller product format.
Use the rear adjustment screw to establish a precise, repeatable retracted position for delicate assembly operations.
Choose this 100 mm bore cylinder when an application requires substantial force, as stepping down to an 80 mm bore drops the push force to 2513 N at 0.5 MPa. The adjustable stroke is ideal for product changeovers, allowing you to dial back the travel window from 75 mm down to 35 mm without swapping the cylinder or adding external stopper blocks. For load-holding requirements without live air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is not a locking mechanism.
When replacing an ISO 15552 cylinder, verify the 100 mm bore, 75 mm stroke, 40 mm adjustment, PT G1/2 port, and your required mounting style. SAIJ supports a specific mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR options. Without a magnet (-S), this model cannot host CMSE reed or DMSE electronic sensors.
Quick checklist
At its maximum operating pressure of 1.0 MPa, it can deliver up to 801 kgf.
The rear adjusting screw acts as a mechanical stop, allowing you to trim the effective stroke by up to 40 mm. This creates a usable travel window of 35 to 75 mm, enabling fine end-position tuning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.