Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX750-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 750mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke750 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10
The AirTAC SAIJ100X750-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 740-750 mm usable travel window, letting you dial back the end position by up to 10 mm during commissioning.
This variant uses a SUS420J2 stainless steel rod (code A) for improved corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10 Is Used
Machine Changeover
Fine-tune the 740-750 mm retract position during product size changes without swapping cylinders or repositioning hard stops.
Long-Stroke Diverters
Adjust the actuation endpoint by up to 10 mm to perfectly time the diverting stroke on varying package sizes.
Assembly Press Setup
Dial in the exact end-of-stroke contact point during commissioning to prevent overtravel and tooling damage.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10 the Right Cylinder?
The 10 mm adjustment range is ideal for fine-tuning end stops on long-stroke machinery without adding external shims. For a fixed end position, use a standard SAI cylinder instead.
With a 750 mm stroke, the unsupported rod is prone to side-loading; use an external guide rail to prevent binding. The PT tapered G1/2 port matches standard pneumatic fittings. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-load holding, specify an SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10 FAQ
At 0.9 MPa, the push force reaches 7068 N.
A rear stopper screw trims the effective travel, creating a 740-750 mm window. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.