Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX750-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 750mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke750 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50
The AirTAC SAIJ100X750-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This yields a usable end-position window of 700-750 mm, letting you fine-tune machine stops at commissioning without swapping out the physical barrel.
The extruded aluminum barrel includes sensor grooves on both sides, and the integrated air cushions at both ends decelerate the load smoothly.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50 Is Used
Machine Setup Tuning
Dial in the exact 700 to 750 mm end-position during commissioning without machining external stopper blocks or replacing the cylinder.
Product Changeover
Quickly adjust the retract distance on a conveyor sorting line when handling different package sizes.
Long-Stroke Ejection
Manage long-travel part ejection where the final 50 mm of travel needs field adjustment to match fixture variations.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50 the Right Cylinder?
An adjustable-stroke model is selected over a fixed SAI cylinder when you need variable end-stops for product changeovers or setup dialing.
For any stroke length of 750 mm, the extended unsupported piston rod is highly susceptible to side-loading forces; always guide the load externally to prevent binding. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air—use an external rod lock or SAIL/BSAI cylinders for pressure-off holding. It is dimensionally interchangeable per ISO 15552 mounting interfaces and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50 FAQ
The maximum force at 1.0 MPa is 801 kgf.
The rear adjuster screw acts as a stopper that lets you shorten the 750 mm nominal stroke by up to 50 mm, giving a usable travel window of 700 to 750 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX750-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.