Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX80-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10
It features a SUS420J2 stainless steel rod and PT tapered port threads. By turning the rear screw, you achieve a 70-80mm usable travel window, perfect for dialing in exact retract positions without adding external stops.
This extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10 Is Used
Precision Press Fit
Dial in the exact 70-80mm travel window during setup to ensure perfect press fits without swapping out physical stopper blocks.
Machine Changeover
Quickly adjust the retract end-stop by up to 10mm when switching between product variants on the same assembly line.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10 the Right Cylinder?
Because the stroke is 80mm, you can safely operate at the 30-800mm/s speed range without worrying about rod side-loading.
To match this ISO 15552 interchangeable cylinder, verify your port type (PT tapered), mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2), and whether you need the -S magnet option for sensor feedback. Remember that the 10mm adjustment window is designed for commissioning fine-tuning, not for locking the load in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10 FAQ
At 0.7MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the nominal 80mm stroke by up to 10mm, creating a 70-80mm usable travel window. This stopper fine-tunes the end position at commissioning but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.