Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX80-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30
The AirTAC SAIJ100X80-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 50-80 mm usable travel window by trimming the 80 mm nominal stroke up to 30 mm.
The unit includes a SUS420J2 stainless steel rod and PT tapered ports. The rear adjuster acts purely as a mechanical stop for fine-tuning end positions during commissioning. It does not hold the load without live air pressure; for load-holding without supply, consider an external rod lock or the SAIL/BSAI series.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30 Is Used
Machine Setup Tuning
Dial in the exact retract end-stop during machine commissioning without disassembling the line or adding external mechanical stops.
Product Changeovers
Quickly adjust the 50-80 mm travel window to accommodate different product sizes on a shared conveyor or clamping fixture.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30 the Right Cylinder?
Choose this 100 mm bore when 50 mm lacks sufficient force (1374 N at 0.7 MPa) or 125 mm is excessive (8590 N at 0.7 MPa). The 30 mm adjustable window is ideal for product changeovers, allowing you to fine-tune the retract position without swapping cylinders or adding external stops. Unlike fixed-stroke SAI cylinders, this model accommodates variable end-stops directly.
For direct replacement, match the 100 mm bore, 80 mm stroke, PT ports, and SUS420J2 rod material. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the stroke is under 300 mm, side-load risks are lower, but an external guide is still recommended for heavy lateral loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30 FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the 80 mm nominal stroke by up to 30 mm, providing a 50-80 mm usable travel window. It only sets the end position; it does not lock or hold the load without live air pressure.
The maximum push force is 7068 N at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX80-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.