Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX800-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20
The AirTAC SAIJ100X800-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 780 to 800 mm. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
This configuration utilizes a SUS420J2 stainless steel rod (material code A) paired with PT tapered port threads (G1/2). The robust 25 mm rod diameter and M20x1.5 rod thread provide excellent resistance to bending under high thrust, though an 800 mm stroke still requires external guidance to prevent excessive side-loading.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20 Is Used
Machine Setup Changeover
Dial in the exact 780-800 mm end position during format changeovers on heavy machinery without swapping out the entire cylinder assembly.
Variable End-Stop Diverting
Adjust the retract stop on the fly to accommodate different pallet sizes on a conveyor line, ensuring precise physical positioning every time.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20 the Right Cylinder?
The 20 mm rear adjuster allows you to fine-tune the retract end position during commissioning or product changeovers without adding external stopper blocks. For fixed-travel applications without end-position tuning, the standard SAI cylinder is a simpler alternative.
When integrating this cylinder, remember the rear screw acts only as a travel stop, not a locking device. It cannot hold a load without continuous live air pressure. For fail-safe load holding, consider the SAIL pneumatic lock or BSAI clamp-lock series. Dimensionally interchangeable per ISO 15552, it supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20 FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 800 mm down to 780 mm. This mechanical stop fine-tunes the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX800-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.