Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX90-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 90mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke90 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S
The AirTAC SAIJ100X90-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 70-90 mm, letting you dial in the exact retract end-position during commissioning without adding external stops.
This unit is built with a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and includes a magnet for position sensing. It uses PT tapered ports and runs at speeds of 30-800 mm/s. The extruded aluminum barrel features sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic solid-state switches.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S Is Used
Machine Changeover
Fine-tune the 70-90 mm retract stop during product size changes without swapping the cylinder or repositioning external physical stops.
End-Position Tuning
Dial in the exact end-of-stroke contact point during commissioning to compensate for mechanical tolerance stack-up in the fixture.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S the Right Cylinder?
Choose this 100 mm bore when a smaller 80 mm unit (providing 2513 N at 0.5 MPa) lacks the necessary thrust, but a 125 mm bore is excessive. The 20 mm rear adjuster acts purely as a travel stop to fine-tune the 70-90 mm window; it is not a lock. For load-holding without live air pressure, select a SAIL or BSAI cylinder instead. As a dimensionally interchangeable ISO 15552 profile cylinder, it matches replacements by specifying 100 mm bore, 90 mm stroke, 20 mm adjust, PT port, and a -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S FAQ
The SAIJ100X90-20-S uses an external rear screw to mechanically shorten the stroke. With a 90 mm nominal stroke and a 20 mm adjustment code, the usable travel window is 70-90 mm. The adjuster is a stop, not a lock, so it only sets the end position.
At 0.9 MPa, the push force increases to 7068 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX90-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.