Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX900-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 900mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke900 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30
The AirTAC SAIJ100X900-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 870 to 900 mm, allowing you to trim the nominal 900 mm stroke by up to 30 mm during machine setup. This bore delivers substantial thrust, pushing 5497 N at 0.7 MPa and 7068 N at 0.9 MPa.
The barrel is extruded aluminum with sensor grooves on both sides for flexible switch placement. This specific configuration uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and features PT tapered ports. The rear adjustment screw acts purely as a mechanical stop to set the end position; it does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30 Is Used
Machine Changeovers
Dial in the 870-900 mm travel window during product size transitions without swapping the cylinder or adding external stops.
End-Position Tuning
Fine-tune the exact retract distance at commissioning using the rear screw to perfect the pickup or placement point.
Material Handling
Adjust the stroke on the fly to accommodate varying package sizes on a moving line, ensuring precise stops.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30 the Right Cylinder?
An adjustable stroke is preferred over a fixed SAI cylinder when you need to fine-tune end positions during commissioning or accommodate product changeovers without adding external stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is not a lock.
At a 900 mm stroke, the 25 mm diameter rod and M20x1.5 thread provide robust support, but an external guide is strongly recommended to prevent side-loading damage on this long unsupported travel. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30 FAQ
The rear adjuster acts as a mechanical stop that trims the effective stroke by up to 30 mm, giving you a usable travel window of 870 to 900 mm. It sets the end position but does not lock or hold the load without live air pressure.
The pull force at 0.5 MPa is 3681 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX900-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.