Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX95-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 95mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke95 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30
The AirTAC SAIJ100X95-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 65-95mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This configuration uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and PT tapered port threads. The rear adjuster acts purely as a travel stop for end-position tuning during commissioning; it is not a locking device and will not hold the load without live air pressure. Mounting options include the reduced SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30 Is Used
Machine Changeover
Dial in the 65-95mm travel window during product size changes to set new retract stops without physically swapping the cylinder.
Diversion Gates
Fine-tune the actuation endpoint on sorting conveyors to accommodate varying package dimensions on the fly.
Commissioning Calibration
Trim up to 30mm of stroke during machine setup to perfect the end-of-stroke position and avoid mechanical hard stops.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30 the Right Cylinder?
If your application requires less force, stepping down to an 80mm bore provides 2513N at 0.5MPa, whereas moving up to a 125mm bore yields 6136N.
Because the 95mm stroke is under 300mm, side-load stress is minimal, though the 25mm rod still handles standard guiding well. For true position holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster only sets the travel end. To match this exact ISO 15552 replacement, verify the 100mm bore, 95mm stroke, 30mm adjustment, PT G1/2 port, and the standard mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30 FAQ
At 0.7MPa, the push force increases to 5497N.
The rear adjusting screw lets you shorten the 95mm nominal stroke by up to 30mm, creating a usable travel window of 65-95mm. It acts as a mechanical stop and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX95-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.