Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX260-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 260mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke260 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S
The AirTAC SAIJ100X260-40-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, letting you trim the nominal 260 mm travel back by up to 40 mm. This yields a precise 220-260 mm usable end-position window at commissioning without bolting on external stops.
This SKU features a SUS304 stainless steel rod for superior corrosion resistance and carries a built-in magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the fluid porting uses a PT tapered G1/2 thread.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S Is Used
Product Changeover
Dial in the 220-260 mm travel window during format changes without swapping the cylinder or repositioning hard stops.
End-Position Tuning
Fine-tune the retract end-position at commissioning to absorb mechanical tolerances and achieve exact seating.
Variable End Stops
Set custom retract distances on automated lines where multiple product sizes require different stroke lengths.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S the Right Cylinder?
Choose this adjustable-stroke model when a fixed SAI cylinder cannot accommodate product changeovers or fine end-position tuning on a 260 mm stroke. The rear screw acts purely as a travel stop to set deceleration, not as a lock; a plain SAIJ does not hold loads without live air, so for fail-safe holding point to the SAIL or BSAI series. Because the 260 mm stroke is substantial, always support the load with an external guide to prevent side-loading damage to the M20x1.5 rod thread.
For a direct ISO 15552 replacement, match the 100 mm bore, 260 mm stroke, 40 mm adjustment, PT G1/2 port, and the -S magnet. The mounting hardware uses the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw lets you shorten the 260 mm nominal stroke by up to 40 mm, creating a 220-260 mm usable travel window. It functions as a mechanical stop to set the end position, not as a load-holding lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX260-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.