Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX280-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 280mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke280 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100
The AirTAC SAIJ100X280-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a generous 180-280mm usable travel window, allowing you to dial back the nominal 280mm stroke by up to 100mm during commissioning.
This model features a SUS304 stainless steel rod (option B) for superior corrosion resistance and carries a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Remember that the rear adjuster acts purely as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100 Is Used
Machine Changeover
Fine-tune the 180-280mm travel window during product size transitions without swapping out the entire cylinder or adding external mechanical stops.
Corrosive Environment Actuation
Rely on the SUS304 stainless steel rod and adjustable end-stop for reliable double-acting motion in washdown or corrosive factory settings.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100 the Right Cylinder?
An adjustable stroke is ideal for product changeovers on a line, letting you fine-tune the end position rapidly instead of adding external stops. To replace an ISO 15552 cylinder, match the 100mm bore, 280mm stroke, 100mm adjustment, PT ports, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 280mm stroke is substantial, ensure external guidance to prevent side-loading damage to the SUS304 rod. For position holding without live air, select the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100 FAQ
The rear adjuster acts as a mechanical stop that lets you trim the effective travel down from 280mm to a minimum of 180mm. It sets the deceleration end-point but does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX280-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.