Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX290-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 290mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke290 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10
The AirTAC SAIJ100X290-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a 10 mm reduction of its 290 mm nominal travel, creating a precise 280-290 mm usable window. The extruded aluminum barrel incorporates sensor grooves on both sides for straightforward detection integration.
This specific configuration utilizes a SUS304 stainless steel rod (code B) for superior corrosion resistance and includes PT tapered port threads. The rear adjuster functions strictly as a mechanical stop to dial in the end position during commissioning; it does not lock or hold the load without live air pressure. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10 Is Used
Machine Setup Tuning
Dial in the exact end-of-stroke position within the 280-290 mm window during initial commissioning without adding external mechanical stops.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate slight variations in product sizes on a production line.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10 the Right Cylinder?
The 10 mm adjustable travel window is ideal for fine-tuning end stops during machine setup or product changeover without swapping out the entire cylinder. For any load-holding requirements without continuous air pressure, this cylinder is insufficient as the adjuster is only a stop; consider an AirTAC SAIL or BSAI series instead.
Because the 290 mm stroke exceeds the 300 mm threshold, it is crucial to ensure adequate external guiding to prevent excessive side-loading on the SUS304 rod, despite the robust M20x1.5 rod thread. To match this ISO 15552 interchangeable cylinder, specify a 100 mm bore, 290 mm stroke, 10 mm adjustment, PT ports, and the desired mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10 FAQ
At 0.7 MPa, the push force increases to 5497 N.
The SAIJ100X290-10 features a rear adjusting screw that allows you to shorten the effective stroke by up to 10 mm, providing a usable travel range of 280-290 mm. This mechanical stopper only sets the end position and does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX290-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.