Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX30-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 30mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke30 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S
It features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for position sensing. The integrated rear stopper allows you to fine-tune the end position at commissioning without adding external stops.
With a 30 mm nominal stroke and a 10 mm adjustment range, this SKU provides a usable travel window of 20 to 30 mm. It uses PT tapered ports and supports adjustable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, directly compatible with AirTAC CMSE reed and DMSE electronic solid-state switches.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S Is Used
Product Changeovers
Dial in the exact end-stop from 20 to 30 mm during format changes on a packaging line, eliminating the need to physically swap cylinders for different package sizes.
Machine Setup Tuning
Fine-tune the clamping end-position at commissioning to prevent over-travel, using the rear screw to perfectly set the stroke without external mechanical stops.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S the Right Cylinder?
Choose this 100 mm bore cylinder when an application demands high thrust (5497N at 0.7 MPa) but only short, finely tuned travel. If your force requirements are lower, stepping down to an 80 mm bore yields 3518N at 0.7 MPa, whereas moving up to 125 mm provides 8590N. The adjustable stroke is ideal for machine setups requiring a variable end-stop during product changeovers, offering flexibility that a fixed-stroke SAI cylinder cannot match.
For load-holding applications, remember that the rear adjuster functions strictly as a travel stop, not a lock; this SAIJ cylinder will not hold its load without live air pressure. For dead-end holding, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder. The mounting interface uses the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S FAQ
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 10 mm. For this 30 mm stroke model, it provides a usable travel window of 20 to 30 mm, which is set during commissioning without swapping the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX30-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.