Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX325-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 325mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke325 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10
The AirTAC SAIJ100X325-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 325 mm nominal stroke that can be fine-tuned down by 10 mm, yielding a 315-325 mm usable travel window for precise end-position calibration during commissioning.
This variant incorporates a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Because the stroke exceeds 300 mm, an external guide is recommended to prevent excessive side-loading on the extended rod.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10 Is Used
Precision End-Stop Tuning
Dial in the exact 315-325 mm travel window during machine commissioning to perfect part ejection without physically swapping the actuator.
Product Changeover Setup
Quickly adjust the retract end-position by up to 10 mm on automated lines handling slightly varying product lengths.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10 the Right Cylinder?
The 10 mm rear adjuster allows you to dial in the exact end-stop without swapping cylinders or adding external stops, making it ideal for product changeovers. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series.
To replace an existing ISO 15552 cylinder, match the 100 mm bore, 325 mm stroke, 10 mm adjustment range, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2; omitting FB, CA, CB, CR). As this configuration omits the -S magnet, it does not support AirTAC CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10 FAQ
At the maximum 1.0 MPa pressure, the push force reaches 801 kgf.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 10 mm, creating a 315-325 mm usable travel window. It is a travel stop only, not a lock, and cannot hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX325-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.