Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX35-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 35mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke35 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10
The AirTAC SAIJ100X35-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 25 to 35 mm, allowing you to dial back the 35 mm nominal stroke by up to 10 mm during commissioning.
This variant uses a SUS304 stainless steel rod (code B) for superior corrosion resistance. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10 Is Used
Precision End-Stop Tuning
Dial in the exact retract position within a 25-35 mm window during machine commissioning without installing external physical stops.
Product Changeover
Quickly adapt the stroke length by up to 10 mm on a packaging line when handling slightly different product sizes.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10 the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring exact end-position tuning without swapping cylinders or adding external stops. Since the stroke is under 300 mm, side-load stress is minimal, though an external guide is still recommended for heavy lateral forces.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 35 mm stroke, 10 mm adjustment, G1/2 port, PT thread, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting. Note that this unit lacks a magnet (-S), so CMSE reed or DMSE electronic sensors cannot be used for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10 FAQ
At 0.7 MPa, the push force increases to 5497 N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 35 mm nominal stroke by up to 10 mm. This creates a usable travel window of 25 to 35 mm for fine-tuning end positions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX35-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.