Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX350-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 350mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke350 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S
The AirTAC SAIJ100X350-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 250-350 mm usable travel window by trimming up to 100 mm off the 350 mm nominal stroke.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel integrates sensor grooves on both sides, and the rear stopper allows rapid end-position tuning during commissioning without swapping the cylinder.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S Is Used
Product Changeovers
Dial in exact end-stops on the fly when switching product sizes on a packaging line, utilizing the 100 mm travel window.
Machine Setup Tuning
Fine-tune the retract position during commissioning without adding external physical stops or changing the cylinder.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S the Right Cylinder?
The 100 mm adjustment window is ideal for product-size changeovers on a production line. Because the stroke is 350 mm, use an external guide to prevent rod sag and excessive side loading.
For ISO 15552 replacement matching, specify: 100 mm bore, 350 mm stroke, 100 mm adjustment, PT tapered ports, and the -S magnet. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true load-holding, select a SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S FAQ
It operates at speeds between 30 and 800 mm/s.
The rear adjuster screw allows you to shorten the effective travel by up to 100 mm, creating a 250-350 mm usable window. It acts as a physical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.