Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX350-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 350mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke350 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S
The AirTAC SAIJ100X350-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 340 to 350 mm, allowing you to dial back the nominal 350 mm stroke by up to 10 mm during commissioning.
This variant includes a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered ports. The extruded aluminum barrel features sensor grooves on both sides, and the integrated magnet (-S) is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches for exact position feedback.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S Is Used
Machine Setup Tuning
Fine-tune the 340-350 mm end position during initial machine commissioning without fabricating external stopper blocks.
Product Size Changeover
Quickly adapt the stroke end on production lines running multiple product sizes by adjusting the rear screw.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S the Right Cylinder?
Choose the SAIJ adjustable-stroke design over a fixed SAI when you need variable end-stops for product changeovers without swapping the physical cylinder. For replacement, verify the 100 mm bore, 350 mm stroke, 10 mm adjustment, PT ports, and the -S magnet.
Because the 350 mm stroke is substantial, ensure proper external guiding to prevent side-load damage to the rod. Note that the rear adjuster acts only as a travel stop to decelerate the load; it does not hold the load without live air. For true load-holding without pressure, consider an external rod lock or AirTAC SAIL/BSAI models.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S FAQ
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 10 mm. This creates a usable travel window of 340 to 350 mm, enabling fine-tuning of the end position without swapping the cylinder.
At the maximum pressure of 1.0 MPa, the push force reaches 801 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX350-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.