Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX475-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 475mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke475 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10
The AirTAC SAIJ100X475-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 465-475mm usable travel window, trimming the 475mm nominal stroke by up to 10mm. The extruded aluminum barrel includes dual sensor grooves, and the SUS304 stainless steel rod resists corrosion in humid environments.
This model uses PT tapered port threads (G1/2) and offers adjustable pneumatic cushioning at both ends. The rear adjuster acts purely as a mechanical stop for end-position tuning; it does not lock the load. For position holding without live air pressure, consider an AirTAC SAIL or BSAI series cylinder.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10 Is Used
Machine Setup Tuning
Dial in the exact 465-475mm retract position during initial commissioning to align heavy fixtures without machining spacer plates.
Product Changeover
Quickly adjust the end-stop for different package sizes on a packaging line by turning the rear screw during format resets.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10 the Right Cylinder?
The 10mm adjustment range is ideal for fine-tuning the retract end during machine setup or product changeover without adding external stops. Because the 475mm stroke is substantial, always use an external guide to support the load and mitigate side-load stress on the 25mm rod. This cylinder is dimensionally interchangeable per ISO 15552 and omits the FB, CA, CB, and CR mounting styles, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10 FAQ
At 0.9MPa, the push force increases to 7068N.
The rear adjuster screw lets you shorten the effective travel from the nominal 475mm down to 465mm. It functions as a mechanical stop to fine-tune the end position and does not hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.