Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX475-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 475mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke475 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50
The AirTAC SAIJ100X475-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, letting you dial back the effective travel by up to 50 mm to achieve a precise 425-475 mm usable window.
The rear adjustment mechanism acts purely as a mechanical stop to fine-tune the retract end position during commissioning or product changeover, meaning you never have to bolt on external stops or swap the cylinder. It is a true extruded aluminum profile cylinder, dimensionally interchangeable per ISO 15552, and omits the FB, CA, CB, and CR mounting formats in favor of the standard Basic, FA, LB, TC, FTC, TCM1, and TCM2 set.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50 Is Used
Product Changeover
Quickly fine-tune the retract end-position within the 425-475 mm window when switching a production line to a different pallet or fixture size.
Machine Setup
Dial in the exact stroke limit during commissioning without adding external mechanical stops, using the rear screw to set the perfect resting position.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50 the Right Cylinder?
The 475 mm stroke exceeds the threshold where an unsupported piston rod is prone to buckling, so an external guide is mandatory to prevent excessive side-load wear on the seals and barrel.
Select the adjustable SAIJ over a fixed SAI when your machine setup requires variable end-stops or fine end-position tuning without physical cylinder replacement. Because the rear adjuster only sets the travel end and relies on the air cushion for deceleration, it cannot hold a load without live air pressure; for true load-holding, specify an AirTAC SAIL or BSAI series cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50 FAQ
The rear adjuster screw acts as a mechanical stop that lets you trim the 475 mm nominal stroke back by up to 50 mm, creating a usable travel window of 425-475 mm. It only sets the end position and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX475-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.