Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX550-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 550mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke550 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30
The AirTAC SAIJ100X550-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It delivers a robust 3927 Newtons of push force at 0.5 MPa, stepping up to 7068 Newtons at 0.9 MPa. The built-in rear stopper screw allows you to trim the nominal 550 mm travel back by up to 30 mm, creating a precise 520-550 mm usable window for commissioning.
This variant uses a SUS304 stainless steel rod (code B) for superior corrosion resistance and ships with PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for position holding, consider a SAIL or BSAI series cylinder.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30 Is Used
Machine Setup & Changeover
Fine-tune the 520-550 mm end position during product line changeovers without replacing the entire cylinder or adding external mechanical stops.
Variable End-Stop Positioning
Dial in the exact retraction point on packaging lines or testing fixtures where the target position varies slightly between production runs.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30 the Right Cylinder?
The adjustable 520-550 mm window is ideal for fine-tuning end positions during machine setup or product changeover, eliminating the need to swap cylinders or bolt on external stops. Because the stroke is 550 mm, the 25 mm rod handles side loads well, but an external guide rail is still recommended for long unsupported travel. This SAIJ model uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw lets you shorten the 550 mm nominal stroke by up to 30 mm, providing a usable travel window of 520-550 mm. The adjuster acts as a stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX550-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.