Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S
The AirTAC SAIJ100X60-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims travel by up to 10 mm, creating a precise 50-60 mm usable stroke window for exact end-position tuning. Equipped with a magnet, it supports CMSE reed and DMSE solid-state sensors.
This model features a 25 mm rod and M20x1.5 rod thread, providing a robust interface that handles high side loads well, while the extruded aluminum barrel integrates sensor grooves on both sides. The rear adjuster acts as a travel stop to dial in the retract position during commissioning without adding external stops; it is not a lock, so load-holding without live air requires a SAIL or BSAI cylinder.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S Is Used
Machine Setup Calibration
Dial in the exact 50-60 mm retract position during initial commissioning or product changeover without swapping cylinders or adding external mechanical stops.
Corrosive Environment Actuation
Utilize the SUS304 stainless steel rod and standard double-acting air operation for reliable performance in washdown or corrosive manufacturing settings.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S the Right Cylinder?
The 10 mm adjustable range is ideal for applications requiring fine end-position tuning during machine setup or product changeover, avoiding the need to swap a fixed-stroke SAI cylinder. To match this ISO 15552 replacement exactly, specify the 100 mm bore, 60 mm stroke, 10 mm adjustment, PT tapered ports, and the -S magnet option.
For any stroke of 60 mm, side loads are minimal, but you should still guide the load to prevent rod binding. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Operating speed ranges from 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S FAQ
The rear adjuster allows you to shorten the 60 mm nominal stroke by up to 10 mm, providing a usable travel window of 50-60 mm. This stop fine-tunes the retract end position during commissioning but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.