Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX60-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S
The AirTAC SAIJ100X60-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 60 mm nominal travel to a precise 30-60 mm window. The integrated -S magnet supports position sensing via AirTAC CMSE reed and DMSE electronic switches mounted into the dual-side sensor grooves.
This specific SKU features a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The rear adjuster acts purely as a mechanical stop to fine-tune the end position during commissioning without needing external stops. It utilizes the standard SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S Is Used
Product Changeovers
Dial in the 30-60 mm stroke window during format changes on packaging lines, avoiding the need to physically swap cylinders for different package sizes.
Machine Setup
Use the SUS304 rod and PT tapered ports in washdown or corrosive factory environments, relying on CMSE/DMSE sensors to confirm end-of-stroke positions.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S the Right Cylinder?
The adjustable 30-60 mm travel window is ideal for product changeovers on a line, letting you set variable end-stops on the fly instead of swapping out a fixed-stroke SAI cylinder.
Because the rear screw is a travel stop and not a locking mechanism, it cannot hold a load without live air pressure. For fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder, or install an external pilot-operated check valve. To match this ISO 15552 footprint, specify a 100 mm bore, 60 mm stroke, 30 mm adjustment, PT ports, SUS304 rod, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S FAQ
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to mechanically shorten the 60 mm nominal stroke anywhere down to 30 mm. This creates a 30-60 mm usable travel window for fine-tuning end positions at commissioning, but it acts only as a stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.