Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX60-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S
The AirTAC SAIJ100X60-50-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 10 to 60 mm usable travel window, allowing you to dial back the 60 mm nominal stroke by up to 50 mm during commissioning.
This variant features a SUS304 stainless steel rod for corrosion resistance and includes a magnet for CMSE and DMSE sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster acts purely as a mechanical stop to fine-tune the retract position without holding the load pneumatically.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S Is Used
Machine Changeover
Dial in the 10-60 mm travel window during product size changes to set new retract positions without physically swapping the cylinder.
End-Stop Tuning
Use the 50 mm rear mechanical stop to precisely trim the final retract position during commissioning, avoiding the need for external shims.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S the Right Cylinder?
The 50 mm adjustment range is ideal for product changeovers, letting you set variable end-stops on the fly without swapping cylinders or adding external stops. For holding loads without live air pressure, select the SAIL or BSAI series instead, as this adjuster is a travel stop, not a lock. To match this ISO 15552 replacement, specify the 100 mm bore, 60 mm stroke, PT tapered ports, and the -S magnet for electronic DMSE or reed CMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S FAQ
The nominal stroke is 60 mm, but the 50 mm rear adjuster allows you to shorten the effective travel to anywhere between 10 mm and 60 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.