Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX600-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S
The AirTAC SAIJ100X600-75-S is a double-acting ISO 15552 profile cylinder featuring a SUS304 stainless steel rod and an integrated rear stroke adjuster.
This bore uses a G1/2 port and includes a magnet for CMSE and DMSE sensors. The rear screw acts purely as a travel stop for end-position tuning, not a lock, while the extruded aluminum barrel retains standard ISO 15552 mounting dimensions.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S Is Used
Product Size Changeover
Dial in the 525-600mm travel window on the fly when adapting a packaging line to new carton dimensions without swapping hardware.
End-Position Tuning
Fine-tune the exact retract stop during machine commissioning to perfect a pressing or forming operation.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S the Right Cylinder?
The 75mm adjustment window is ideal for product-size changeovers, replacing fixed-stroke SAI cylinders when external stops are impractical. To match this ISO 15552 cylinder, specify 100mm bore, 600mm stroke, PT ports, and the -S magnet.
Because the stroke is 600mm, the M20x1.5 rod needs external guiding to prevent excessive side loading. Note that the rear adjuster and air cushions only decelerate the load; for position holding without live air, use a SAIL or BSAI lock cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S FAQ
The maximum force is 801kgf at 1.0MPa, and the operational speed range is 30-800mm/s.
The rear adjuster screw lets you shorten the 600mm nominal stroke by up to 75mm, creating a 525-600mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX600-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.