Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX650-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 650mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke650 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10
It features a SUS304 stainless steel rod and PT tapered ports. By integrating a 10mm adjustment mechanism, this model creates a precise 640-650mm usable travel window, allowing you to dial in the exact retract position without swapping out the entire unit.
The rear adjuster functions strictly as a travel stop to set the end position and relies on the integrated air cushions for deceleration; it is not a locking mechanism and will not hold a load without continuous live air pressure. For position holding without air, consider an external rod lock or the related SAIL pneumatic lock series. This extruded aluminum profile cylinder includes dual sensor grooves for CMSE reed or DMSE electronic switches, though a magnet is not pre-installed on this specific configuration.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10 Is Used
End-Position Tuning
Dial in the exact retract distance within the 640-650mm window during machine commissioning to achieve precise seating without mechanical shims.
Product Changeover
Quickly adjust the stroke stop by a few millimeters on a packaging line when switching to a slightly different carton size.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10 the Right Cylinder?
Choose this 100mm bore when an 80mm cylinder lacks thrust, as stepping up from the 80mm bore increases your 0.5 MPa push force from 2513N to 3927N. An adjustable stroke is highly beneficial here for product changeovers or commissioning fine-tuning, letting you trim the retract up to 10mm instead of installing external stops or ordering a fixed-stroke SAI cylinder. To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 650mm stroke, 10mm adjustment, PT port thread, and your required mounting option from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 kits.
Because this unit features a 650mm stroke, the 25mm rod diameter and M20x1.5 rod thread provide substantial rigidity, but an external guide is strongly recommended to prevent excessive side-loading on the piston over such an extended travel distance.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10 FAQ
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a stopper that lets you shorten the nominal 650mm stroke by up to 10mm, creating a 640-650mm travel window. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX650-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.