Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX700-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100
The AirTAC SAIJ100X700-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 600-700 mm from its 700 mm nominal stroke. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting.
This configuration includes a SUS304 stainless steel rod for corrosion resistance and PT tapered port threads. The rear adjuster acts purely as a mechanical stop to dial in end positions during commissioning; it is not a lock and will not hold the load without live air. For load-holding requirements, consider the SAIL or BSAI series.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100 Is Used
Long-Stroke Press Feed
Dial in the 600-700 mm travel window to synchronize material indexing without replacing the actuator.
Product Changeover Diverter
Quickly adjust the rear stopper to accommodate different package sizes on a packaging line.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100 the Right Cylinder?
The 100 mm adjustment window is ideal for product changeovers on long-stroke lines, allowing you to trim travel without swapping cylinders or adding external stops. If you need to hold a load mid-stroke without air pressure, the SAIJ adjuster cannot perform this function; you must use a SAIL pneumatic lock or an external rod lock.
Because the 700 mm stroke creates an unsupported length, the 25 mm rod diameter and M20x1.5 thread require external guiding to prevent excessive side loading. This model uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. It is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force increases to 5497 N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke by up to 100 mm, providing a usable travel window of 600-700 mm. It sets the end position but does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.