Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX700-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S
The AirTAC SAIJ100X700-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 600 to 700 mm, letting you dial back the nominal 700 mm stroke by up to 100 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This specific configuration includes a SUS304 stainless steel rod for superior corrosion resistance and a PT tapered port thread. The -S magnet option enables position detection with AirTAC CMSE reed or DMSE electronic sensors. It uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S Is Used
Variable End-Stop Tuning
Dial in the exact retract position within the 600-700 mm window during machine commissioning to accommodate varying product dimensions without mechanical rework.
Product Size Changeover
Quickly adjust the effective stroke on packaging lines when switching to a different package size, using the 100 mm trim range to set new end positions rapidly.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S the Right Cylinder?
The adjustable stroke is ideal for machine setup and product changeover, allowing you to fine-tune the retract end position without swapping the cylinder or adding external stops. At 700 mm, the stroke is long, so an external guide is recommended to manage side loads and prevent rod binding.
To match this ISO 15552 interchangeable cylinder, specify a 100 mm bore, 700 mm nominal stroke, 100 mm adjustment, PT port, SUS304 (B) rod, and -S magnet. Remember that the rear adjuster acts as a travel stop, not a lock; the SAIJ does not hold loads without live air. For true load-holding, consider an external rod lock or the SAIL series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the 700 mm nominal stroke by up to 100 mm, providing a usable travel window of 600 to 700 mm. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.